Test Sequence Setting - Ariston ELIOS 25 Manual

USIN T E KEYS ' ' or '
CYCLES TO 5 1 15 2 OR 25.
PRESS ' ' TO CONFIRM T E PRO RAMMED DATA
AND START T E TEST. Y PRESSIN ' esc ' T E
MODIFICATIONS ARE CANCELED AND T E DISPLAY
A AIN S O S T E NUM ER OF PRESET CYCLES.

Test sequence setting

Data Regulation range
TMR 5 .. 25
' SET T E NUM ER OF
Default
5
32
P8
: CALCULATION OF THE ENERGY PRODUCED
This parameter permits to manage the data concerning the
measurement of the eat quantity produced by the plant.
The quantity of energy produced will be stored in the power
unit storage every 2 hours approx.
If the ow value being stored is zero the message ' FLO
OFF ' will appear on the display and the energy counting will
be deactivated.
Select 'RESET' and press 'ENTER' to reset the counter of the
energy produced.
If the parameter is not activated in the selected scheme,
the message ' NONE ' will appear on the display.
AFTER SELECTIN PARAMETER P PRESS
T E '
PRESS ARRO S ' ' or '
T E PARAMETERS FOUR COUNTIN
PRODUCED:
Plant ow rate in litres/minute
Reset of produced energy counters
' KEY.
' TO CYCLICALLY SCROLL
T E ENER Y
' FLO '
' RST '