Volvo Penta TWD1643GE Series Operator's Manual page 29

47711296 01-2019 © AB VOLVO PENTA
Display setting
settings for the display. Adjustment is made with the 7
and 9 buttons; see DCU panel illustration.
• Set contrast (%) - contrast setting.
• Set backlight time (sec) - time setting (in seconds)
for display backlighting on, lighting is then shut off if
the panel is not used.
• Set backlight brightness - display backlighting
brightness setting.
Information
shows the data for the engine and DCU.
• Engine hardware Id - engine control unit part
number.
• Engine software Id - engine control unit software
part number.
• Engine dataset1 Id - engine data set 1 part number.
• Engine dataset2 Id - engine data set 2 part number.
• Vehicle Id - chassis number.
• DCU hardware Id - DCU part number.
• DCU software Id - DCU software part number.
• DCU dataset1 Id - DCU data set 1 part number.
•
DCU dataset2 Id - DCU data set 2 part number.
Instruments and Controls
27