Volvo Penta TWD1643GE Series Operator's Manual page 19

Hide thumbs Also See for TWD1643GE Series:
Table of Contents

Advertisement

47711296 01-2019 © AB VOLVO PENTA
Certified engines
If you own an emission-certified engine used in an
area where exhaust emissions are regulated by
law, this places special demands on the care and
maintenance you provide your engine.
NOTICE! Neglects or failure to follow the points listed
here may invalidate the engine emission certificate.
This means AB Volvo Penta can no longer guarantee
engine conformity with the certified model. Volvo Penta
is not responsible for damages or costs arising as a
result of this.
Certification means that an engine type has been
checked and approved by the relevant authority.
The engine manufacturer guarantees that all
engines of the same type are equivalent to the
certified engine.
It is the responsibility of the operator/user to ensure
that no intentional misuse of the engine takes place.
Volvo Penta maintenance and service intervals
must be complied with.
Any case of malfunction must be rectified without
delay.
Only use genuine Volvo Penta parts or spare parts
with the same quality as genuine Volvo Penta parts.
Volvo Penta recommends that service to injection
pumps, pump settings and injectors always are
carried out by a qualified workshop.
The engine must not be converted or modified in any
way, except with accessories and service kits that
Volvo Penta has approved for the engine.
No installation changes to the exhaust pipe and
engine air inlet ducts may be made.
No warranty seals (where present on the product)
may be broken by unauthorized persons.
The general instructions in the Operator's Manual
concerning operation, service and maintenance
apply.
Introduction
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents