Introduction - Volvo Penta TWD1643GE Series Operator's Manual

Introduction

47711296 01-2019 © AB VOLVO PENTA
Check that you have received the correct
operator's manual before continuing reading. If
not, please contact your Volvo Penta dealer.
For engine designations, refer to Engine. The
designation is stated on the engine plate, refer to
Technical Data, page 98.
The illustrations in this book may cover several product
types, which means that there may be slight
differences between the illustrations and the
purchased product. This does, however, not affect the
validity of the information and/or instructions in the
manual. Volvo Penta reserves the right to make
alterations to specifications, design features, and
illustrations without prior notice.
At service, software that affects the functionality
described in this manual can be updated.
About this manual
This Operator's Manual contains the information
required for the correct, safe operation and
maintenance of your Volvo Penta engine. Read the
Operator's manual carefully and learn to handle the
engine and other equipment in a safe manner before
you start the engine.
Warranty
Your new Volvo Penta engine is covered by a limited
warranty, subject to the conditions compiled in the
Warranty Information. AB Volvo Penta's liability is
limited to the specification in the Warranty Information
and Emission Control System Warranty Statement.
Read the information carefully, as soon as possible
after delivery. It includes important information about
service and maintenance; the owner is responsible for
being familiar with checking and implementing these.
Otherwise AB Volvo Penta may deny its warranty
obligations in part or in full.
Contact your Volvo Penta dealer if you have not
received information on how to access the
Warranty Information or recived the Service Book.
13