Volvo Penta TWD1643GE Series Operator's Manual page 33

47711296 01-2019 © AB VOLVO PENTA
Save/Restore (Save/Restore)
• Save current configuration (Save current
configuration). Save the current display settings.
• Restore last configuration (Restore last
configuration). Restore the last displayed settings
saved.
• Restore default configuration (Restore default
configuration). Restores all display setting menus to
factory settings.
NOTICE! The settings in the following menus do not
normally need to be changed; should a change be
necessary it must be carried out by an authorized
Volvo Penta technician. Refer to the installation
manual for further engine information.
Authorized Volvo Penta dealer or OEM only
• I/O Status (I/O Status)
• CAN Termination (CAN Termination)
•
Stop Logic DCU (Stop Logic DCU)
• Potentiometer supply (Potentiometer supply)
• Speed Control (Speed Control)
• Control display unit (Control display unit)
• Genset/VE (Genset/VE)
• Buzzer (Buzzer)
• Information (Information)
Instruments and Controls
31