Volvo Penta TWD1643GE Series Operator's Manual page 26

Hide thumbs Also See for TWD1643GE Series:
Table of Contents

Advertisement

Instruments and Controls
24
Preheat
manual activation of pre-heating. When it is activated,
the EMS system senses at start-up if pre-heating is
needed. For automatic pre-heating, refer to the Setup /
Preheat on ignition menu.
NOTICE! Must be activated with temperatures below
0°C (32°F).
The pre-heating time is adjusted to suit the engine
temperature, and can last for up to 50 seconds both
before and after starting. Refer also to Starting
procedure EMS 2.
Press SEL, the text Preheat requested will be
shown
The display automatically returns to the Engine
Data menu.
Governor mode
activates/shuts off droop. To set the droop level, refer
to the Setup / Governor gradient or Governor droop
menu.
Select Isochronous mode or Droop mode with the
SEL button.
Diagnostics
shows the error list containing the 10 latest active and
inactive faults. The fault codes are shown as text on
the display.
Scroll through the fault list with the arrow keys.
Trip Data reset
resets trip data, such as fuel consumption.
Press the SEL button to reset trip data
47711296 01-2019 © AB VOLVO PENTA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents