Setting A Hard Disk Drive Master And User Password In System Setup - Toshiba S3 User Manual

S3 user's guide
Hide thumbs Also See for S3:
Table of Contents

Advertisement

232
Keeping Your Files Safe
Hard disk drive passwords
If the two passwords match, System Setup displays:
Registered
message appears. Repeat
password again.
7
If you want to delete the user password, leave the space
blank and press
Registered
8
Press
9
When System Setup prompts you to confirm your
change, press
Setting a hard disk drive master and user password in
System Setup
To register master and user passwords in System Setup:
1
Click Start, Shutdown, and then OK.
The computer shuts down.
. If the two passwords do not match, an error
Enter
.
to save the change.
End
.
Y
Make sure you choose a hard disk drive master password you
can remember easily. If you set a hard disk drive user
password and later forget the password or lose your password
diskette, you will need to enter the hard disk drive master
password in order to access your hard disk.
HINT: The hard disk drive shipped with your computer may not
support the master password feature. When you attempt to set
master password protection, your computer may alert you that
this feature is not supported by your drive. If this happens and
you want to establish a master password for your hard disk,
contact your network administrator for instructions.
step 5
and
step 6
twice. System Setup displays:
to enter the
Not

Advertisement

Table of Contents
loading

This manual is also suitable for:

S3-s411tdTecra s3-161Tecra s3-341Tecra s3 series

Table of Contents