244
Using the RAID-1 Utility
TOSHIBA RAID Console Utility
NOTE
3
Make the appropriate selections.
4
To apply the settings, click OK.
Viewing the status of an array
To view the status of an array:
1
Start the TOSHIBA RAID Console utility by clicking Start,
All Programs. Then select TOSHIBA, RAID, RAID
Console.
2
Double-click the array icon.
The Array information window appears.
online help for information on using Windows Event
Viewer.
You can also check the status of a hard disk drive on the
TOSHIBA RAID Console. See
hard disk drive" on page 246
Drive lifetime is not always accurately predicted using
information from S.M.A.R.T. To avoid loss of data, it is
recommended that the hard drive be replaced immediately
after receipt of a S.M.A.R.T. warning.
You can view the status of a hard disk drive on the TOSHIBA
RAID Console. See
page 246
for more information.
"Viewing the status of a
for more information.
"Viewing the status of a hard disk drive" on