Toshiba S3 User Manual page 248

248
Using the RAID-1 Utility
TOSHIBA RAID Console Utility
A media check can only be performed on a mirrored array
which is in an optimal state. Refer to
an array" on page 244
If the computer is performing a media check and the
computer is restarted, the media check will resume when the
computer is restarted.
NOTE
To perform a media check:
1 Plug in the AC adapter and power on the computer. (The
computer must be running on power provided by the AC
adapter to perform these steps.)
2 Start the TOSHIBA RAID Console utility by clicking
Start, All Programs. Then select TOSHIBA, RAID,
RAID Console.
3 Click Media Check.
The Confirm media check window appears.
Sample Confirm media check window
4 Click OK.
A media check may take from several minutes up to one hour
to be completed depending on the amount of data to be
checked.
By default the TOSHIBA RAID Utility is set up to perform a
media check on the 3rd Wednesday of each month at 12:00
noon.
for more information.
"Viewing the status of