Toshiba S3 User Manual page 87

8 Place the screw and the cover in a safe place so that you
can retrieve them later.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector on the side you insert into the
computer.
9 Remove the new memory module from its antistatic
packaging.
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
10 Insert the memory module into the socket on the
underside of the computer.
Sample inserting the memory module into the slot
11 Hold the memory module by its edges so that the gold
connector bar faces the slot, at a slight angle to the
socket.
Connecting Other External Devices
Adding memory (optional)
87