Setting A Hard Disk Drive Master And User Password In System Setup - Toshiba M10-S405 User Manual

7 If you want to delete the user password, leave the space blank
and press
8 Press
9 When System Setup prompts you to confirm your change,
Press
Setting a hard disk drive master and user password in
System Setup
CAUTION: Make sure you choose a hard disk drive master
password you can remember easily. If you set a hard disk
drive user password and later forget the password or lose
your password diskette, you will need to enter the hard disk
drive master password in order to access your hard disk.
To register master and user passwords in System Setup:
1 Click Start, then click Shutdown, and click OK.
The computer shuts down.
2 Hold down the
until the on/off light on the system indicator panel illuminates
(green) for approximately one second. When the following
message appears on the screen: "Check system, Then press
[F1] key," press
The System Setup screen appears.
3 Press
screen.
4 Press the spacebar to select Master + User password mode.
5 Press the down arrow key to move to the Master Password
section. You must register a Master Password first.
twice. System Setup displays:
Enter
to save the change.
End
.
Y
key and press and hold the power button
Esc
.
F1
to move to the HDD PASSWORD section on the
H
Toshiba Utilities
Hard disk drive passwords
187
.
Not Registered