Toshiba S3 User Manual page 199

Fingerprint System Boot Authentication
2 Click the Advanced tab.
3 Remove the check mark next to Require users to press
Ctrl-Alt-Delete.
4 Click Apply, then OK.
Enabling Fingerprint Single Touch Boot
To enable the fingerprint single touch boot feature:
1 Double-click the OmniPass key icon in the system tray.
2 Click System Settings.
3 Click PBA Settings, then Enroll PBA Authentication
Device.
4 Select Enable Single Touch Boot feature and click
Next.
5 A Congratulations screen appears. Click Done.
Fingerprint single touch boot takes effect the next time the
system is booted up.
A 25 MB partition is created on the hard disk to store the
configuration information for fingerprint system boot
authentication. Do not delete this partition. If it is deleted,
fingerprint system boot authentication will no longer function;
you will need to re-enter all configured passwords (user/BIOS
password, plus hard disk drive or supervisor passwords if
selected) via the keyboard.
If this hard disk partition is deleted by mistake, create a new
partition by performing the following steps:
1. Check that the hard disk has at least 25 MB of empty
space.
2. Disable system boot authentication by performing steps
1-7 in
on page
Authentication box in step 4 is not checked.
"Enabling Fingerprint System Boot Authentication"
197, making sure that the Enable System Boot
Toshiba Utilities
199