Setting A Hard Disk Drive Master And User Password In System Setup - Toshiba M200/M205 User Manual

Using passwords in the Windows® operating system
illuminates (green) for approximately one second. When
the following message appears on the screen: "Check
system, Then press [F1] key," press
The System Setup screen appears.
3 Press
screen.
4 Press the spacebar, then type in your user password and
press
5 If you want to change the password, input the new
password.
6 When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
message appears. Repeat steps 5 and 6 to enter the password
again.
7 If you want to delete the user password, leave the space
blank and press
Registered
8 Press
9 When System Setup prompts you to confirm your
change, Press
Setting a hard disk drive master and user password in
System Setup
to move to the HDD PASSWORD section on the
H
.
Enter
. If the two passwords do not match, an error
Enter
.
to save the change.
End
.
Y
Make sure you choose a hard disk drive master password you
can remember easily. If you set a hard disk drive user
password and later forget the password or lose your password
diskette, you will need to enter the hard disk drive master
password in order to access your hard disk.
Keeping Your Files Safe
.
Enter
twice. System Setup displays:
187
.
F1
Not