Setting A Hard Disk Drive Master And User Password In System Setup - Toshiba R200-S2032 User Manual

184
Toshiba Utilities
Hard disk drive passwords
4 Press the spacebar, then type in your user password and
press
5 If you want to change the password, input the new
password.
6 When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
message appears. Repeat steps 5 and 6 to enter the
password again.
7 If you want to delete the user password, leave the
password field blank and press
displays:
8 Press
9 When System Setup prompts you to confirm your
change, Press
Setting a hard disk drive master and user password in
System Setup
To register master and user passwords in System Setup:
1 Click Start, then click Shutdown, and click OK.
The computer shuts down.
2 Hold down the
button until the on/off light on the system indicator panel
illuminates (blue) for approximately one second. When
.
Enter
. If the two passwords do not match, an error
Not Registered
to save the change.
End
.
Y
Make sure you choose a hard disk drive master password you
can remember easily. If you set a hard disk drive user
password and later forget the password or lose your password
diskette, you will need to enter the hard disk drive master
password in order to access your hard disk.
Esc
.
Enter
Enter
.
key and press and hold the power
twice. System Setup