Setting A Hard Disk Drive Master And User Password In System Setup - Toshiba Tecra M2V Series User Manual

If the two passwords match, System Setup displays:
Registered
message appears. Repeat
password again.
7 If you want to delete the user password, leave the space
blank and press
Registered
8 Press
9 When System Setup prompts you to confirm your
change, press
Setting a hard disk drive master and user password in
System Setup
To register master and user passwords in System Setup:
1 Click Start, then click Shutdown, and click OK.
The computer shuts down.
2 Hold down the
button until the on/off light on the system indicator panel
illuminates (green) for approximately one second. When
the following message appears on the screen: "Check
system, Then press [F1] key," press
The System Setup screen appears.
3 Press
screen.
. If the two passwords do not match, an error
Enter
.
to save the change.
End
.
Y
Make sure you choose a hard disk drive master password you
can remember easily. If you set a hard disk drive user
password and later forget the password or lose your password
diskette, you will need to enter the hard disk drive master
password in order to access your hard disk.
Esc
to move to the HDD PASSWORD section on the
H
Keeping Your Files Safe
Hard disk drive passwords
step 5 and
twice. System Setup displays:
key and press and hold the power
step 6 to enter the
.
F1
187
Not