Table of Contents
Advertisement
140
Enhancing Productivity
Using Hibernation
7
Click Override all Modes with settings here.
The Set the range window appears.
Sample Set the range window with DC only option
8
Do one of the following:
❖
❖
9
Click OK to close the Full Power Properties window.
10
Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Starting again after Turn Off or Shut down
To start the computer up again, press and release the power
button; the on/off light changes to green.
Using Hibernation
Enabling the Hibernation command
Hibernation is a default setting. If it should become disabled,
you can enable it as follows:
1
Click Start, Control Panel.
The Control Panel window appears.
2
Click Performance and Maintenance.
3
Double-click the Toshiba Power Saver icon.
Click DC only if you want the settings to apply only
when you are using battery power.
Click All for the settings to apply whether you are
using battery power or outlet power.
Advertisement
Table of Contents
