Error Codes - Culligan Medallist Plus Iron-OX5 Owner's Manual

The Culligan Medallist Series Filter is equipped with an advanced error detection system.
During all operating modes the filter's electronics are performing self-diagnostics to ensure
that the unit is operating correctly. There may be times, however, when something may occur
that could cause the unit to improperly operate. In those instances the microprocessor will
identify the exact problem and alert the user with a telephone handset symbol in the upper
left corner of the display and the error code will be shown. Shown below is codes that
would appear if an error is detected.
Display
E1 Motor will not stop turning
E2 Motor stuck
E3 Wrong position
If an error code appears that requires an authorized service technician please contact your
local Culligan Dealer.
For any additional troubleshooting or service needs please contact your local Culligan Dealer.
Error Description Response
Call Culligan service technician
Call Culligan service technician
Call Culligan service technician

Error Codes

01035155 A 09/19
11