Engine Maintenance; Engine Safety; Servicing The Air Cleaner - Toro Groundsmaster 4300-D Operator's Manual

Figure 53
•
Rear roller bearings (2 per cutting unit)
Figure 54
Note:
Make sure that the grease groove in each
roller mount aligns with the grease hole in each
end of the roller shaft. To help align the groove
and hole, there is also an alignment mark on 1 end
of the roller shaft.

Engine Maintenance

Engine Safety

Shut off the engine before checking the oil or adding
oil to the crankcase.

Servicing the Air Cleaner

g008906
Check the whole intake system for leaks, damage, or
loose hose clamps. Do not use a damaged air filter.
Service the air-cleaner filter only when the service
(Figure 54)
indicator requires it. Changing the air filter before it is
necessary only increases the chance of dirt entering
the engine when you remove the filter.
Important:
correctly and seals with the air-cleaner body.
g008907
44
Make sure that the cover is seated