Service Interval Chart; Pre-Maintenance Procedures; Pre-Maintenance Safety - Toro Groundsmaster 4300-D Operator's Manual

Service Interval Chart

CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you perform any maintenance.
Pre-Maintenance
Procedures

Pre-Maintenance Safety

•
Keep all parts of the machine in good working
condition and all hardware tightened, especially
blade-attachment hardware. Replace all worn or
damaged decals.
•
Never allow untrained personnel to service the
machine.
•
Before adjusting, cleaning, or repairing the
machine, do the following:
1. Move the machine to level ground.
2. Disengage the drives.
3. Lower the cutting units.
4. Move the traction pedal to the N
position.
5. Engage the parking brake.
6. Move the throttle switch to the
position.
7. Shut off the engine and remove the key.
8. Wait for all moving parts to stop.
Figure 43
•
Whenever you park or store the machine, or leave
it unattended, lower the cutting units unless you
use a positive mechanical lock.
•
If possible, do not perform maintenance on the
machine while the engine is running. If you must
run the engine to perform maintenance on the
machine, keep your hands, feet, other body parts,
and clothing away from all moving parts, the
mower-discharge area, and the underside of the
mowers.
•
Do not touch parts of the machine or an attachment
that may be hot from operation. Allow the parts
to cool before attempting to maintain, adjust, or
service them.
•
Use jack stands to support the machine and/or its
components when required.
•
Carefully release pressure from components with
stored energy.
EUTRAL
•
If your machine requires major repairs or if you
desire assistance, contact your Toro Distributor.
•
Use only genuine Toro replacement parts and
accessories. Replacement parts and accessories
-
LOW IDLE
made by other manufacturers could be dangerous,
and such use could void the product warranty.
41
decal125-2927