Toro Groundsmaster 4300-D Operator's Manual page 18

Figure 12
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 12B and
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 12D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O position locks the protected menu.
N
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to Protect Settings option. Use the
right button to change the setting. Setting the Protect
Settings to O allows you to view and change the
FF
settings in the Protected Menu without entering the
PIN code. Setting the Protect Settings to O
protected options and requires you to enter the PIN
code to change the setting in the Protected Menu.
After you set the PIN code, rotate the key switch O
and back to the O position to enable and save this
N
feature.
Figure 12C). Repeat this step
position and
FF
hides the
N
Viewing and Changing the
Protected Menu Settings
1. In the Protected Menu, scroll down to Protect
Settings.
2. To view and change the settings without entering
a PIN code, use the right button to change the
Protect Settings to O
3. To view and change the settings with a PIN
code, use the left button to change the Protect
Settings to O
key in the ignition switch to the O
then to the O
Setting the Counterbalance
1. In the Settings Menu, scroll down to
Counterbalance.
2. Press the right button to select counterbalance
and change between the low, medium, and high
g028522
settings.
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle
time between O
FF
18
.
FF
, set the PIN code, and turn the
N
FF
position.
N
, 8S, 10S, 15S, 20S, and 30S.
FF
position and