Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
Media and Additional Parts
Description
Operator's Manual
Engine operator's manual
Parts catalog
Operator training material
Note:
Determine the left and right sides of the
machine from the normal operating position.
1
Adjusting the Control Arm
Position
No Parts Required
Procedure
You can adjust the control arm position for your
comfort.
1. Loosen the 2 bolts securing the control arm to
the retaining bracket
Description
No parts required
No parts required
No parts required
No parts required
No parts required
(Figure
2).
Qty.
–
–
–
–
–
Qty.
1
1
Review these materials before operating the machine.
1
1
1. Control arm
2. Retaining brackets
2. Rotate the control arm to the desired position
and tighten the 2 bolts.
10
Use
Adjust the control arm position.
Remove shipping blocks and pins.
Adjust the roller scraper (optional).
Install the mulching baffle (optional).
Prepare the machine.
Use
Figure 2
3. Bolts (2)
g031681