5
Preparing the Machine
No Parts Required
Checking the Tire Pressure
Check the tire pressure before use; refer to
the Tire Pressure (page
Important:
Maintain pressure in all tires to
ensure a good quality-of-cut and proper machine
performance. Do not underinflate the tires.
Checking the Fluid Levels
1. Check the engine-oil level before starting the
engine; refer to
Checking the Engine-Oil Level
(page
21).
2. Check the hydraulic-fluid level before starting
the engine; refer to
System (page
21).
3. Check the cooling system before starting the
engine; refer to
Checking the Cooling System
(page
51).
Greasing the Machine
Grease the machine before use; refer to
Bearings and Bushings (page
grease the machine results in premature failure of
critical parts.
Checking
22).
Checking the Hydraulic
Greasing the
42). Failure to properly
12