Toro Groundsmaster 4300-D Operator's Manual page 15

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine such as the operating status, various
diagnostics and other information about the machine
(Figure 10) There is a splash screen and main
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen, at any time, by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
1
4
Figure 10
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can
use it to back out of any menu you are currently
using.
•
Middle Button—use this button to scroll down
menus.
•
Right Button—use this button to open a menu
where a right arrow indicates additional content.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
g020650
2
3
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
g020650
15
Indicates when scheduled service
should be performed
Engine rpm/status—indicates the
engine rpm
Hour meter
Info icon
Fast
Slow
Fuel level
Stationary regeneration required
The glow plugs are active
Raise the cutting units
Lower the cutting units
Sit in the seat
The parking brake is engaged
The range is high (Transport)
Neutral
The range is low (Mow)
Coolant Temperature (°C or °F)
Temperature (hot)
The PTO is engaged
Not allowed
Start the engine
Shut off the engine