Table of Contents
Advertisement
IMU383 Series User's Manual
________________________________________________________________________
Figure 18 Unit Configuration
Advanced Configuration
Users who wish to access some of the more advanced features of NAV-VIEW and the IMU383
Series products can do so by selecting the "Advanced" tab at the top of the "Unit Configuration"
window.
WARNING
Users are strongly encouraged to read and thoroughly understand the consequences of altering the
settings in the "Advanced" tab before making changes to the unit configuration. These settings
are discussed in detail in Chapter 4 below.
Behavior switches (unused with IMU) are identified at the top of the page with marked boxes. A
blue box will appear if a switch has been enabled similar to Figure 19 below. The values can be
set in the same manner as noted in the previous section. To set a value, users select the
appropriate "Modify" checkbox on the left side of the menu and select or enable the appropriate
value they wish to set. At the bottom of the page, users have the option of temporarily or
permanently setting values. When all selections have been finalized, simply press the "Set
Values" button to change the selected settings.
Doc# 7430-1398-01
Page 64
Downloaded From
Oneyac.com
Advertisement
Table of Contents
