Inventory - Grizzly T27139 Owner's Manual

The following is a list of items shipped
with your tool. Before beginning setup, lay
these items out and inventory them.
If any non-proprietary parts are missing
(e.g. a nut or a washer), we will gladly
replace them; or for the sake of expedi-
ency, replacements can be obtained at
your local hardware store.
If you cannot find an item on this
list, carefully check around/inside
the tool and packaging materials.
Often, these items get lost in pack-
aging materials while unpacking or
they are pre-installed at the factory.
G
F
-8
-

Inventory

Box 1 (Figure 2)
A. Laminate Trim Router Motor ..............1
B. Dust Shield/Port .................................1
C. Fixed Base .........................................1
D. Collet Wrench ....................................1
E. Curved Trimmer Guide ......................1
F. Straight Trimmer Guide .....................1
G. Plunge Router Base ...........................1
H. Bag 1 (not shown) ..............................1
I.
E
Figure 2. T27139 inventory.
— Replacement Motor Brushes .........2
Bag 2 (not shown) ..............................1
— Collet ⁄ " ........................................1
3
8
— Thumb Screw ................................1
A
B
Model T27139 (Mfd. Since 3/16)
Qty
C
D