Grizzly T27140 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The Model T27140 uses compound lever action
to cut up to 12" wide sheet metal. It includes
an adjustable work stop for repeat cuts with
workpieces up to 6" long and a built-in 12" ruler
on the table.

Specifications

Maximum Cut Length ..................................... 12"
Cutting Capacities (Thickness):
Steel ................................................... 0.020"
Aluminum............................................ 0.050"
Brass .................................................. 0.025"
Weight .......................................................34 lbs.
1. Overloading this tool can cause injury
from flying parts if tool breaks. Do not
exceed tool capacities.
2. NEVER operate bench shear without
plastic safety guard in place.
3. Always chamfer and de-burr sharp
sheet metal edges after cutting. Sharp
edges on sheet metal can result in
severe cuts.
4. NEVER place your fingers or hands
between shear blades. Amputation or
severe cuts can easily occur!
5. Always wear
approved safety glasses when using
this tool.
6. Inspect bench shear for any cracked
components or loose fasteners. Correct
any problems before use. Loose hard-
ware or cracks could result in sudden,
unexpected movements during use.
7. DO NOT allow children to have unsper-
vised access to bench shear.
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
leather gloves
COPYRIGHT © MARCH, 2015 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 11/14) #WK17309 PRINTED IN CHINA
MODEL T27140
12" HEAVY-DUTY
Damage to your eyes and hands could
result from using this tool without proper
protective gear. Always wear safety glasses
and heavy gloves when operating this tool.
and
If you have never used this type of machine
or equipment before, we strongly recom-
mend that you read books, trade magazines,
or get formal training before beginning any
projects. Regardless of the content in this
section, Grizzly Industrial will not be held
liable for accidents caused by lack of train-
ing.
BENCH SHEAR
INSTRUCTIONS
Figure 1. Model T27140.
V1.03.15