Table of Contents
Advertisement
Assembly
The Model T27139 router is supplied with
a plunge base, a fixed base, a straight trim-
mer guide, and a curved trimmer guide.
Select the proper base and guide for the
intended use during assembly.
To assemble router:
1. Thoroughly wipe down all components
of trim router with a dry shop rag.
2. Release clamping lever on router
base.
3. Attach router motor to base by align-
ing guide channel with guide pin (see
Figure 3).
— If using fixed base, engage adjust-
ment gear attached to clamping
lever assembly.
Guide
Channel
Guide
Pin (Hidden)
Figure 3. Fixed base with gear.
4. Tighten locking lever.
5. Verify that laminate trim motor is secure
in base and does not move.
Model T27139 (Mfd. Since 3/16)
Adjustment
Gear
To attach dust collector/shop vacuum:
1. Place dust shield/port alignment pin
into fixed base.
2. Seat dust shield/port so thumb screw
hole and threads align.
3. Install and tighten thumbscrew (see
Figure 4).
4. Attach 1
⁄
" vacuum hose to dust port.
1
4
Alignment
Pin (Hidden)
Dust
Port
Figure 4. Fixed base with dust port.
Thumb
Screw
-9
-
Advertisement
Table of Contents
