Engineering Tool "Easy Starter - Lenze i950 Series Mounting And Switch-On Instructions

Commissioning
Operating interfaces
Engineering tool »EASY Starter«
Engineering tool »EASY Starter«
The »EASY Starter« is a PC software that is especially designed for the commissioning and diagnostics of the
inverter.
• »EASY Starter« Download
Sample screenshot:
The upper part of the Settings tab displays the sequence of five essential commissioning steps. By clicking a
link, the corresponding interface appears with the most important parameters to be set.
Commissioning step Description of the settings
Basic setting Settings to adapt the inverter to a simple application based on the default setting.
Communication Settings for communication via the system bus (EtherCAT), another fieldbus and the engineering port
X16 (PC interface).
Kinematics Basic settings of the technology application serve to adapt the motor and load side (gearbox ratio,
mounting direction, moment of inertia etc.)
Motion Basic settings of the technology application for adapting the motion control.
Technology application Settings to adapt the technology application to the application.
Parameter fields
• The parameters are sorted by topic.
• The parameter values currently set are displayed.
• Fields highlighted in yellow indicate the online connection to the device.
• Pressing the key [F1] opens the program help.
132