Attachments/Accessories; Before Operation; Before Operation Safety - Toro Outcross 9060 Series Operator's Manual

Traction Unit
Description
Weight (dry)
Gross vehicle weight
Maximum axle weight
Rated capacity
Maximum ground speed
•
For loader specifications, refer to
Specifications (page
•
For 3-point hitch specifications, refer to
3-Point-Hitch Specifications (page

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com
approved accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Dimension, Weight, or Measurement
Model
07511AA
Model
07511BA
Model
07511CA
Model
07511DA
All models: 5,443 kg (12,000 lb)
Front axle (with loader): 4,535 kg (10,000 lb)
Front axle (without loader): 2,268 kg (5,000 lb)
Rear axle: 3,175 kg (7,000 lb)
Standard bed: 453 kg (1,000 lb)
Cargo bed: 2,041 kg (4,500 lb)
Forward: 34 km/h (21 mph)
Reverse: 32 km/h (20 mph)
Loader
39).
28).
for a list of all
Base: 2,340 kg (5,160 lb)
Base: 2,440 kg (5,380 lb)
With loader and ballast box (mortar added) installed: 3,443 kg (7,590 lb)
Base: 2,581 kg (5,690 lb)
Base: 2,681 kg (5,910 lb)
With loader and ballast box (mortar added) installed: 3,683 kg (8,120 lb)
Operation

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Know how to stop the machine and shut off the
engine quickly.
•
Only the operator and one passenger are allowed
on the machine at the same time.
•
When entering and exiting the operator platform,
use the step and handhold. Use care when mud,
snow, or moisture is present.
•
Inspect all safety devices and decals. Do not
operate the machine until all safety devices are in
place and functioning properly and all decals are
present and legible.
•
Chemical substances used may be hazardous and
toxic.
21