Regularly clean the area of vision of the
●
camera and keep it in a clean state, without
snow or ice.
Do not cover the field of vision of the
●
camera.
Always replace damaged or worn blades
●
when required to avoid lines on the cam-
era's field of vision.
Check that the windscreen is not dam-
●
aged in the area of the camera's field of vi-
sion.
The use of outdated maps on the naviga-
●
tion system may cause the system to show
traffic signs incorrectly.
In the waypoints mode of the navigation
●
system, the traffic sign detection system is
only partly available.
Failure to heed the control lamps and
●
corresponding text messages when they
light up may result in damage to the vehi-
cle.
Time
Setting the time on the infotainment sys-
tem
Press
/
> Settings.
●
Select the menu option Time and date to
●
›››
set the time
page
83.
74
Operation
Setting the time on an analogue instru-
ment panel
›››
In the classic view
page 65
●
ton
of the multifunction steering wheel
pressed when you have selected the date,
route and autonomy information.
Press and turn the button
to make the
●
adjustments.
Setting the time on analogue the instru-
ment panel
When in the Trip data menu select the
●
function (
> Interior > Instru-
Autonomy
ment panel).
Press the button
on the multifunction
●
steering wheel until the Service menu is dis-
played on the instrument panel display
›››
page
67.
Select the menu Time .
●
Adjust the correct time by turning the right
●
thumbwheel of the multifunction steering
wheel.
Revolution counter
The rev counter indicates the number of en-
gine revolutions per minute.
Together with the gear-change indicator, the
rev counter offers you the possibility of using
the engine of your vehicle at a suitable
speed.
The beginning of the red zone of the rev
counter indicates the maximum speed in any
gear after running-in and with the engine hot.
hold the but-
However, it is advisable to change up a gear
or move the selector lever to D (or lift your
foot off the accelerator) before the needle
reaches the red zone
We recommend that you avoid high revs and
that you follow the recommendations on the
gear-change indicator. Consult the addition-
al information in
optimal
gear.
CAUTION
To prevent damage to the engine, the rev
●
counter needle should only remain in the
red zone for a short period of time.
When the engine is cold, avoid high revs
●
and heavy acceleration and do not make
the engine work hard.
For the sake of the environment
Changing up a gear early will help you to
save fuel and minimise emissions and en-
gine noise.
›››
.
›››
page 213, Selecting the