Seat Leon Owner's Manual page 153

Steering wheel heating*
Steering wheel heating works only with the
engine running.
Steering wheel heating levels
The selected flywheel heating level will be
displayed on the instrument panel display.
Level control is carried out using the
on the multifunction steering wheel:
Brief press (less than 1 second): the heating
●
is switched on at maximum level. Press the
steering wheel button repeatedly until the
desired level is adjusted. To switch off seat
heating, press the steering wheel button re-
peatedly until the heated steering wheel OFF
icon is displayed on the instrument panel.
Long press (more than 1 second): the heat-
●
ing is switched off directly from the level that
is currently operating. If the steering wheel
button is pressed again for a long period, the
heating is switched on directly at the last lev-
el saved before switching off.
Automatic off
The steering wheel heating will be switched
off automatically when any of the following
conditions are met:
Power consumption is too high.
●
The steering wheel heating system is faulty.
●
Air conditioning
If the ignition is switched off.
●
Parking ventilation*
With the parking ventilation function, the pas-
senger compartment can be ventilated in
spring/summer.
The power required for parking ventilation will
button

be provided by the vehicle's 12V battery.
Connecting parking ventilation
The control and ignition of the parking venti-
lation function will be carried out through the
SEAT CONNECT mobile App:
The parking ventilation function will be
●
turned on through the immediate power but-
ton on that App.
By programming a departure time.
●
In the event of low level charge of the 12V
battery, the parking ventilation will not turn
on.
Disconnecting parking ventilation
The parking ventilation will turn off in the fol-
lowing situations:
When the operating time selected by the
●
user in the App for the immediate turn on
mode has ended.
When the scheduled departure time has
●
been reached.
The maximum operating period of the park-
ing ventilation is 60 min.
Programming a departure/trip start
The activation of the parking ventilation for a
scheduled time is only valid for a single venti-
lation process. The departure time must be
for each newly programmed ventilation proc-
ess.
Before programming the departure time, you
must check that the date and time of the car
are correctly set.
When programming a departure time, the car
automatically calculates, depending on the
environmental conditions, the necessary op-
erating time of the parking ventilation.
CAUTION
Foods sensitive to heat or cold, medica-
tions and other objects can be damaged
by the airflow.
Do not place any type of food, medicines
●
or other temperature sensitive items in
front of the ventilation slots.
Note
If parking ventilation works repeatedly for
long periods of time, the 12V battery
charge level will drop. It is advisable to take
»
151