Vehicle i-Size positions
Front passenger seat
airbag enabled
X
i-U: Position suitable for forward- or rear-facing i-Size child restraint systems with universal certification.
X: Position not suitable for i-Size child restraint systems.
Securing the child seat with the "ISOFIX/i-
Size" system
You are obliged to follow the seat manufac-
turer's instructions.
Open the cut-out section behind the
●
marked grooves to access the retaining rings
›››
Fig.
27.
Press the child seat onto the "ISOFIX" re-
●
taining rings until it is heard to engage se-
curely. If the child seat is equipped with Top
Tether anchor points, secure it to the corre-
›››
spondent ring
page
35. Observe the
manufacturer's instructions.
Pull on both sides of the child seat to ensure
●
that it is properly anchored.
Child seats with the "ISOFIX/i-Size" and Top
Tether attachment system are available from
Technical Services.
Transporting children safely
airbag disabled
i-U
WARNING
The securing rings are designed only for
use with "ISOFIX" and Top Tether system
child seats.
Never secure other child seats that do
●
not have the "ISOFIX" or Top Tether system,
or safety belts or any other objects to the
securing rings – as this can result in poten-
tially fatal injuries to the child.
Ensure that the child seat is correctly se-
●
cured to the "ISOFIX" and Top Tether secur-
ing rings.
Rear side seat
i-U
Top Tether securing belts
Rear seats: adjustment and assembly
Fig. 29
according to the Top Tether belt.
Rear central seat
X
»
35