Seat Leon Owner's Manual page 119

When a car that is manufactured in a country
that drives on the right travels to a country
that drives on the left (or vice versa), it is nor-
mally necessary to cover part of the head-
light bulbs with stickers or to change the ad-
justment of the headlights to avoid dazzling
other drivers.
In such cases, the regulations specify certain
light values that must be complied with for
designated points of the light distribution. This
is known as "Tourist light".
The light distribution of the headlights allows
the specific "tourist light" values to be met
without the need for stickers or changes be-
ing made to the settings.
Note
"Tourist light" is only allowed temporarily. If
you are planning a long stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights.
Interior lights
Lighting of the instrument panel,
displays and switches
Depending on the model, the lighting of the
instrument panel and controls can be adjus-
ted in the infotainment system, using the
Lights
function button > Interior > Lighting

›››
page 87.
With the ignition on and without light activa-
tion, the analogue instrument panel lighting
remains activated in daytime light conditions.
The lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the

tive, the instrument panel lighting may even
switch off. The objective of this function is to
provide the driver with a visual indication that
he or she should activate the dipped beam.
If your vehicle is equipped with a digital in-
strument panel (Digital SEAT Cockpit), the
following message will appear Turn on the
lights on the instrument panel.
Interior and reading lights
Detail of roof lining: front lighting of the
Fig. 93
passenger compartment.

Turning the interior lights on or off.
Door contact connection.
The interior lights come on automatically
when you unlock the vehicle, open a door

or disconnect the ignition.

The light goes out a few seconds after
closing all the doors, when locking the ve-
hicle or connecting the ignition.
function ac-
Reading light
The reading light is tactile, each lens is turned
on and off individually by pressing in the re-
spective central area. In addition, the intensi-
ty of the light can be adjusted according to
the pressure exerted.
If you want to turn on the two lenses together
you must press the symbol
Glove compartment and luggage com-
partment lighting*
When opening and closing the glove com-
partment on the front passenger side and the
rear lid, the respective light will automatically
switch on and off.
Footwell lighting*
The lights in the footwell area below the dash
(driver and front passenger sides) will switch
on when the doors are opened and will de-
crease in intensity while driving. This intensity
can be adjusted through the infotainment
›››
Fig. 93.

»
117