Press the WPS button on the WLAN router
●
until the warning light on the router starts
flashing. If the WLAN router does not support
WPS the network must be configured man-
ually.
OR: Press and hold the WLAN button on the
●
WLAN router until the WLAN light on the router
starts flashing.
Press the WPS button on the WLAN device.
●
The wireless (WLAN) connection is establish-
ed.
Repeat this process to connect other devices.
Configure Internet access
The Infotainment System can use the WLAN
hotspot of an external device to establish an
internet connection.
Establishing the connection with the wire-
less network (WLAN)
Activate and check the wireless hotspot on
●
the external device. If necessary, refer to the
manufacturer's instruction manual.
Press the HOME >
button; OR access the
●
Media mode and press the Settings menu.
Press on the menu WLAN > Enable WLAN
●
connection and check the verification box.
Press the Find function button and select
●
the device you want from the list.
Data transfer
If necessary, enter the network key of the
●
device in the Infotainment System and con-
firm with OK.
Manual settings:
To manually enter the network settings of
●
an external (WLAN) device.
The wireless (WLAN) connection is establish-
ed. To complete the connection, it may be
necessary to enter other data into the device.
Note
Due to the large number of devices on the
market, it is not possible to guarantee fault-
free operation of all functions.
175