Seat Leon Owner's Manual page 70

on the multifunction steering wheel for ap-
proximately 5 seconds. When it is released,
the Service menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Vehicles with digital instrument panel (SEAT
Digital Cockpit):
While in Classic View , go to the Initial Da-
●
ta screen, press the button on the multi-

function steering wheel for about 5 seconds
and release it.
Restart the service interval display
Select the Service menu and follow the in-
structions on the screen of the instrument
panel.
Restart the oil service
Select the Restore Oil service menu and
follow the instructions on the instrument pan-
el display.
Restart journey data
Select the Reset trip menu and follow the
instructions on the instrument panel display
to reset the value.
68
Operation
Identifying letters on engine (LDM)
Select the menu Engine code . The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the Time menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunc-
tion display)
3 Applies to vehicles with analogue instrument
panel
The display of the travel data (multifunction
display) shows different values about the
journey and the consumption.
Change from one display to another
Vehicles without multifunction steering wheel:
press the rocker switch on the wind-
● 
›››
screen wiper lever page 78.
Vehicles with multifunction steering wheel:
Turn the right thumbwheel of the multifunc-
●
›››
tion steering wheel page 79.
Changing memory
Vehicles with analogue instrument panel:
Press the button on the windscreen
●

wiper lever or the button of the multifunc-

tion steering wheel.
Vehicles with digital instrument panel:
Depending on the view, select Trip data
●
and press the left arrow or the

the multifunction steering wheel.
– The memory is deleted if
Since start:
the journey is interrupted for more than 2
hours.
– Display and stor-
Since refuelling:
age of the journey data and the con-
sumption values collected. When refuel-
ling, the memory is deleted.
– This memory contains trav-
Long-term:
el data up to a maximum of 19 hours and
59 minutes or 99 hours and 59 minutes,
or up to a maximum of 1999.9 km or
9999.9 km. When one of these values is
exceeded (varies depending on the ver-
sion of the instrument panel), the memo-
ry is deleted.
Delete journey data presets
When in Travel data select desired memo-
●
ry.
Hold the button of the multifunction
● 
steering wheel or the button of the

button on