Seat Leon Owner's Manual page 176

function button to close all the open ap-
plications.
Press to display the mobile phone device

screen on the infotainment system
screen.
To open the MirrorLink® settings.

Press to return to the MirrorLink® main

menu.
Note
You will find information about technical re-
quirements, compatible mobile phone de-
vices, certified applications and their avail-
ability on the SEAT (www.seat.com) and
MirrorLink® websites, or at SEAT dealer-
ships.
WLAN access point*
Introduction
3 Not available for model: Media System
The Infotainment System can be used to
share a WLAN connection with up to 8 devi-
›››
ces page 174, Configuration for sharing
a connection over WLAN.
The Infotainment System can also use the
WLAN hotspot of an external device to pro-
vide Internet to the devices connected to the
›››
hotspot (WLAN client)
174
Note
Data transmission may incur charges.
●
Due to the high volume of data exchanged,
SEAT recommends the use of a flat rate tar-
iff for data transmission. Mobile phone op-
erators can provide the relevant informa-
tion.
The exchange of data packages may
●
generate additional costs, depending on
your mobile phone rate, particularly if you
are abroad (for example, roaming rates).
Configuration for sharing a con-
nection over WLAN
Establishing the connection with the wire-
less network (WLAN)
Pulse the HOME >
●
Activate the wireless network. To do so,
●
press the WLAN function button.
Activate the wireless network (WLAN) on the
●
device that is to be connected. If necessary,
refer to the manufacturer's instruction man-
ual.
Activate the mobile device assignment on
●
the Infotainment System. To do so, press the
Enable WLAN connection button and acti-
vate the checkbox.
Enter and confirm the network key dis-
●
played on the device.
page 175.
Infotainment System
button.

The following settings can also be made on
the menu Share connection:
Security level: WPA2 encryption automati-
●
cally generates a network key.
Network key: Network key automatically
●
generated. Press the function button to man-
ually change the network key. The network
key must have a minimum of 8 characters
and a maximum of 63.
SSID: WLAN Network name (maximum of 32
●
characters).
Do not send network name (SSID): Acti-
●
vate the checkbox to deactivate the visibility
of the wireless (WLAN) network.
The wireless (WLAN) connection is establish-
ed. To complete the connection, it may be
necessary to enter other data into the device.
Repeat this process to connect other devices.
Wi-Fi Protected Setup (WPS)
3 This depends on the equipment and the coun-
try in question.
Wi-Fi Protected Setup can be used to create
a ciphered local wireless network quickly and
simply.
Establish the connection with the wireless
●
network (WLAN).