Table of Contents
Advertisement
information on this topic..
By this point you have probably plugged the USB cable in to the
computer and the DMX USB PRO, so if you have, leave it that
way. If not, now is a good time to do so.
DMX Out
The DMX Out socket is connected to the network of DMX512
devices that are to be controlled by the DMX USB PRO.
It is not necessary to have any connection to the DMX Out socket
while programming the DMX USB PRO.
DMX In
The DMX In socket is connected to the DMX512 controller whose
output is to be captured by the DMX USB PRO.
11
Advertisement
Table of Contents
Need help?
Do you have a question about the DMX USB PRO and is the answer not in the manual?