Enttec Phero Product Manual

Back Panel

Box Contents

ENTTEC PHERO (73900 or 79001)

Mounting brackets

This user manual

Features
30 independently controllable RGB Pixels

Flexible, light and slick design

In-built Power Supply

Compatible with ENTTEC Pixelator and Pixie driver

Plink data bus allows to daisy-chain up to 11 units

Standard Cat6 wiring allows up to 300m distances

Mains power through Powercon connectors for

convenient installation
50.000+ hours expected LED life

Up to 90 DMX channels through Pixelator

Over voltage input protection

Safety
Mains voltages inside, please never intend to open

it when mains connected
1
Do not expose the ENTTEC Phero to rain or moisture,

doing this will void the warranty
Do not remove the cover, there are no serviceable

parts inside
This unit is intended for indoor use only

Ensure proper earth connections

Basic Setup
Connect the ENTTEC Phero to a Plink enabled device

such as ENTTEC Pixelator using a cat5/6 cable
Power up the unit using the blue powercon

connector. The power LED should light up
Feed some data through your Plink enabled device

Product Manual
50824
For latest version visit:
www.enttec.com
ID: 226394