Angelo Po 0G1PE2 Use And Installation Manual page 7

Electric plates
Hide thumbs Also See for 0G1PE2:
Table of Contents

Advertisement

INSTRUCTIONS AND WARNINGS FOR SAFETY
During design and construction, the manufacturer
has paid special attention to factors which may
cause risks to the health and safety of the people in-
teracting with the appliance. As well as complying
with the relative legal requirements, he has adopted
all the "rules of good construction practice". This in-
formation is provided to encourage users to take
special care in order to prevent all risks. However,
there is no replacement for care and attention.
Safety also depends on all the operators who inter-
act with the appliance.
Read the instructions provided in the manual sup-
plied and those applied to the appliance itself with
care, paying special attention to those relating to
safety.
Important
Do not modify the equipment in any way.
Never tamper with, elude, eliminate or bypass the
safety devices installed. Failure to comply with this
rule may cause serious risks to health and safe-
ty.Any change and/or tampering with the equipment
or the security devices will invalidate the CE mark-
ing and entail the forfeiture of the guarantee off ered
by the manufacturer.
Even after you have read all the appropriate docu-
mentation, if necessary on first use carry out a few
trial operations to get to know the controls, espe-
cially those used for switching on and off.
Use the appliance only for the functions intended by
the manufacturer. Improper use of the equipment
could result in risks to the health and safety of peo-
ple, damage to nearby goods and financial losses.
All maintenance work that requires precise, techni-
cal expertise or particular skills or qualifications for
legal reasons,should be carried out by suitably
trained and/or qualified staff and in any case with
recognised experienced gained in the specific field
of intervention.
To maintain hygiene and protect the food proc-
essed from all forms of contamination, all elements
in direct or indirect contact with foodstuffs and all
surrounding zones must be cleaned thoroughly. For
these operations, use only food-approved deter-
gents, and never use flammable products or prod-
ucts which contain substances harmful to health.
Clean only when reasonably necessary and at the
end of each session of use.
After each session of use, make sure that the con-
trol knobs have been turned off and the power sup-
ply lines disconnected.
In case of lengthy downtimes, as well as discon-
necting all supply lines it is also essential to clean
all internal and external parts of the appliance
and the surrounding environment thoroughly,
complying with the manufacturer's instructions
and the relevant legal requirements.
During routine use of the appliance, the Oper-
ator's constant presence is required.
When washing the appliance do not point pressu-
rised water jets at internal parts.
Do not leave flammable objects or materials inside
or close to the appliance.
Caution - warning
The floor, near the appliance, could be slippe-
ry.
Important
The necessary connections (water, electri-
city and gas) must be set up exclusively by
suitably specialised staff , in accordance
with local requirements.
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

1g1pe20g0pe11g0pe10g0pe21g0pe22g0pe2

Table of Contents