Advertisement
INSTALLATION
Freestanding
Width
22-1/2" (572 mm)
Height
28-1/2" (724 mm)
Depth
24" (610 mm)
Weight
185 lbs (84 kg)
Pedestal
40 lbs (18 kg)
Legs
13 lbs (6kg)
Flue size
3" (77 mm) or 4" (102 mm)
Up to 45 lbs. (20 kg) (This can vary widely
Hopper Capacity
depending on pellet size, length, and
diameter)
Burn time
4-1/2 lbs (2 kg) per hour
Approved
Mobile Home, Alcove, Conventional
Installations
Fireplace Insert
21-1/2" (547 mm) (with flashing: 39" (991
Width
mm))
Height
20" (508 mm) (with flashing: 30" (762 mm))
Depth
24" (610 mm) (in fireplace: 10-3/4" (274 mm))
Weight
185 lbs. (84 kg)
Flashing
13 lbs. (6 kg)
Flue size
3" (77 mm) or 4" (102 mm)
Up to 45 lbs. (20 kg) (this can vary widely
Hopper Capacity
depending on pellet size, length, and
diameter)
EPA status
Exempt
Burn time
4-1/2 lbs. (2 kg) per hour
Approved
zero-clearance masonry, as a built-in.
Installations
PREPARATION
Factory packaging must be removed, and some minor assembly
work is required prior to installation. Access to the rear of the stove
is necessary. The circuit board/control panel must be unpacked
and installed in the side flashing on the insert or side panel on the
freestanding (see installation instructions provided with the circuit
board). NOTE: Normally, your dealer will perform these functions.
CLEARANCES
Backwall
3 "
*
77 mm
1 "
26 mm
8 -1/4 "
210 mm
(top)
9 "
229 mm
(sidewall)
SIDEWALL CLEARANCES
4
Adjacent Wall
1 "
With
3 "
26 mm
Vertical
77 mm
Exhaust
77 mm
26 mm
36" (915 mm) max.
48"
(1220 mm)
min.
This freestanding unit has been tested and listed for installation in
residential, mobile home, and alcove applications. This insert unit is
approved for installation into code complying masonry fireplaces. It
is also approved for use in listed factory built fireplaces (UL 127) and
standard residential built-ins (see "As A Built-In Fireplace" section
of this manual), including Mobile Home built-in installations, of the
following description: all brands at least 34" (864 mm) wide and 20-
1/2" (521 mm) high.
FLOOR PROTECTION
3 "
2" (51 mm)
1 "
* WITH HORIZONTAL EXHAUST
38" (966 mm) min.
Backwall
3"
With
77 mm
Vertical
Exhaust
8 -1/4"
210 mm
(Top)
9"
229 mm
(Sidewall)
Stove Door Face Must Be
Equal To Or Pritrude Out
From Face Of Alcove.
ALCOVE CLEARANCES
12"
(305 mm)
2" (51 mm)
28"
712 mm
6" 153mm
*1"
26 mm
8 -1/4"
210 mm
(Top)
9"
229 mm
(Sidewall)
10"
(254 mm)
0
Advertisement
