Optimum OPTIdrill DP 26 Operating Instructions Manual page 18

8
9
10
7
6
5
2
3
4
1
3
Place the machine foot on a flat floor and screw the
column to the machine foot.
Insert the rack into the drilling table support. Some
grease helps to fix the rack in the guide. Pay attention
to the helical gearing on the rack. The longer
untoothed end of the rack must point upward.
EN DP26 Delivery, interdepartmental transport, assembly and commissioning
18 Translation of original instructions Version 1.0.2 - 2020-07-07