Table of Contents
Advertisement
• Please observe the general installation and safety regulations when working on
electrical systems.
• The information given in the product documentation with regard to the
use of the supplied components represents only application examples and
recommendations. The user has to check the suitability of the supplied device
and the information given in this documentation with regard to its use self-
dependently for his individual application as well as the compliance with the
safety regulations and standards valid for his application, and carry out the
required measures, changes and amendments.
• Technical data as well as connection and installation conditions are available in
the product documentation and have to be imperatively observed.
• In case of faults impairing the safety and changes in the operating behavior,
shut down the test device immediately and report the faults to the responsible
personnel.
• Generally, you must not modify or convert the product.
2.6 Product-specific safety instructions
No functional safety!
Electronic pump systems provide machines or systems with hydraulic pressure.
In the case of mechanical and electrical faults, e.g. failure of the power supply,
persons may get caught, hurled or crushed by the installation.
▶
When using the test device in a system/machine make sure that it will not
make the functional safety of the system/machine ineffective or affect it in
whatever way!
Non-observance of control signals on the system side!
If control-side safety precautions are provided, they will be rendered ineffective.
▶
The test device may be used exclusively by personnel who are familiar with the
device, the valve and the hydraulic system. No liability is accepted for damage
caused by operating errors.
Safety instructions
WARNING
RE 29689-B/11.2019; VT-PDFE-1X..., Bosch Rexroth AG
9/32
Advertisement
Table of Contents
