Table of Contents
Advertisement
10.1 Cleaning and care
Ingress of contaminants and humidity!
Malfunction.
▶
Always ensure absolute cleanliness when working with the test device!
Solvents and aggressive cleaning agents!
Damage and accelerated aging of the housing.
▶
Do not use aggressive cleaning agents for cleaning.
Proceed as follow for cleaning and care:
▶
Carry out a visual inspection and check that all lines and connections fit properly.
▶
Check all plug-in and clamping connections of the test device for correct fitting
and damage at least once a year.
▶
Inspect cables for rupture and crushes. Have damaged or defective cables
replaced immediately!
▶
Clean housing parts with a dry and dust-free cloth.
10.2 Repair
For safety reasons, unauthorized modification of the test device is not allowed!
Repairs may only be carried out by Bosch Rexroth AG. For repair and maintenance
work, send the device to the service address specified in chapter 16.1. Devices
returned to Bosch Rexroth for repair have to be shipped in the original packaging,
if possible.
10.3 Spare parts
At www.boschrexroth.com you can order spare parts directly in the eShop. When
ordering spare parts, please state the material number of the relevant spare parts.
Table 5: Material numbers
Material number
R900757051
At www.boschrexroth.com/en/xc/service/spare-parts/index you can have
spare parts listed that can be ordered and order them directly.
Please address all questions regarding spare parts to your responsible Rexroth
Service partner.
Bosch Rexroth AG
Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8
97816 Lohr am Main
Tel: +49 (0) 9352 - 40 50 60
service@boschrexroth.de
For the addresses of foreign subsidiaries, please refer to
www.boschrexroth.com/addresses
Maintenance and repair
NOTICE
VT-PDFE-1-1X/V0/0
RE 29689-B/11.2019; VT-PDFE-1X..., Bosch Rexroth AG
25/32
Test device
Advertisement
Table of Contents
