Ser Instructions; Important Notes; Safety Instructions; Disposal - Bosch BEA 810 Product Description

2. User instructions
2.�

Important notes

Important notes on the agreement pertaining to copy-
right, liability and warranty, about the user group and
obligation on the part of the contractor, are available in
the separate instructions entitled "Important notes and
safety instructions on Bosch TEST EQUIPMENT". These
are to be read thoroughly before using, connecting and
operating BEA 810 / BEA 840 EURO and they must be
observed.
2.2

Safety instructions

All safety instructions are available in the separate in-
structions "Important notes and safety instructions"
on Bosch TEST EQUIPMENT". These are to be read
thoroughly before using, connecting and operating
BEA 810 / BEA 840 EURO and they must be observed.
2.�

Disposal

This BEA ��� � BEA ��� E��� is subject to
European guidelines 2��2�96�EG (WEEE).
Old electrical and electronic devices, including-
cables and accessories or batteries must be
disposed of separate to household waste.
¶
Please use the return and collection sys-
tems in place for disposal in your area.
¶
Damage to the environment and hazards to
personal health are prevented by properly
disposing of BEA 810 / BEA 840 EURO.
2.�

Electromagnetic compatibility (EMC)

BEA 810 / BEA 840 EURO is a product of Class A as un-
der EN 55 022.
i
BEA 810 / BEA 840 EURO can cause radio interference
in the home; in this case the operator may be asked to
implement appropriate measures.
Robert Bosch GmbH
�ser instructions | BEA ��� � BEA ��� E��� | �� BEA ��� � BEA ��� E��� | ��
3.

Description of unit

�.�

Application

The Bosch emissions analysis, hereinafter referred to as
BEA, is used for the user-friendly execution of exhaust
gas measurements on vehicles. Test samples are the
whole range of gasoline and diesel vehicles, which are
used in road traffic and on which emissions measure-
ments have to be carried out, on the one hand due to
legal measures and on the other hand to localize and rec-
tify faults, within the framework of the workshop visit.
BEA is subject to the calibration duty for exhaust gas
measurement devices and must be calibrated regularly.
�.2 �equirements
In order to be able to operate BEA, a country-specific
supplementary equipment set with ESA software must
be available.
�.�

Delivery specification

The scope of the delivery depends on the version ordered.
Description
Trolley
Measuring unit
TFT monitor
PC with operating system Windows XP
USB mouse and
mousepad
PDR 371
*)
BEA 050
*)
RTM 430
*)
Remote control
with batteries (4 units)
Operating instructions
depending on order
*)
�.�

Special accessories

Information about special accessories, such as RTM 430
supplementary equipment set (1 687 001 577) for diesel
exhaust gas measurements or vehicle-specific terminal
cables, other measurement cables and connecting cables,
can be obtained from your Bosch authorized dealer.
| �� en
�rder Number
1 688 003 211
1 687 022 951
1 687 023 482
1 687 023 455
1 687 022 915
1 987 728 002
1 687 023 435
1 687 022 934
1 687 022 599
1 687 246 019
0 092 444 003
1 689 989 034
|
1 689 989 034 2008-08-11