Table of Contents
Advertisement
5.1.3 Wi-Fi Network Connection (Windows)
Note
To use Wi-Fi, an optional WLAN / BT Interface (PA-WB-001) is required.
Make sure both your wireless router/access point's and your printer's network settings are correctly
set up. For more information, see the documentation provided with your wireless router/access point,
or contact the router manufacturer, your system administrator, or Internet service provider.
1.
Configure the network settings:
Using the BPM
-
a.
Connect your printer to the computer using a USB cable.
b.
Click Printer Configuration > Wi-Fi.
c.
Specify SSID, Encryption, and Key (Network Password), and then click Set.
d.
Click Get.
e.
Click Printer Function > Configuration Page.
The network settings are printed. Confirm that the printer's IP address is correct.
Using the LCD/Touchscreen
-
a.
Select Interface > Wi-Fi.
b.
Specify SSID, Security, and Password.
c.
When finished, the Wi-Fi icon and printer's IP address appear on the screen.
2.
Visit support.brother.com, go to your model's Downloads page, and download the latest printer
driver and software.
Run the Seagull Driver Wizard application and select Install printer drivers and Network.
3.
4.
Select your printer, and then click Next.
5.
If your TCP/IP port does not appear in the list, click Create port and select Standard TCP/IP
port > New Port.
6.
Type your printer's IP address and port name, and then click Next.
Click Finish.
7.
8.
Return to the Specify Port window and select the port you created.
9.
Follow the on-screen instructions.
Note
If you cannot install the printer driver:
Remove the printer drivers:
In the Seagull Driver Wizard application, select Remove printer drivers > Automatically
remove all Drivers by Seagull or Use advanced printer driver removal options.
Reset the printer settings:
Start the BPM, and then click Printer Function > Factory Default.
49
Advertisement
Table of Contents
