Table of Contents
Advertisement
11. Install the Paper Core onto the Media
Rewind Spindle.
Note
The paper core is not included in the box.
Use the one you have.
12. Open the Print Head Release Lever and
Label Guide Bar Release Lever, and pull
approximately 650 mm of the label roll
through the Media Output Slot.
13. Feed the leading edge of the media
through the front panel Rewind Slot as
shown.
14. Wrap the label around the internal Media
Rewind Spindle and adhere the label to
the Paper Core. Wind the spindle
counterclockwise until the label is fully
stretched.
39
Advertisement
Table of Contents
