Brother TJ-4420TN User Manual page 69

Setting
Slew Speed
BackFeed Speed
Tear Off
Print Mode
Print Width
List Fonts
List Images
List Formats
List Setup
Control Prefix
Format Prefix
Delimiter Char
Media Power Up
Set up the printer feed speed. Settings range from:
2 - 8 for 203 dpi

2 - 8 for 300 dpi

2 - 6 for 600 dpi

Set up the printer backfeed speed. Settings range from:
2 - 3 for 203 dpi

2 - 3 for 300 dpi

2 - 3 for 600 dpi

Fine-tune the media stop location. Settings range from -120 dots to
120 dots.
Set the print mode.
Print Mode
Tear Off The top of the next label is aligned with the Print
Head burn line.
Peel Off Enable the Peeler Mode.
Cutter Enable the Cutter Mode.
Rewind Enable the Rewind Mode.
Set the print width. Settings range from 2 dots to 999 dots.
Print the current printer fonts list to the label. The fonts can be stored in
the printer's DRAM, Flash, or optional memory card.
Print the current printer images list to the label. The images can be
stored in the printer's DRAM, Flash, or optional memory card.
Print the current printer formats list to the label. The formats can be
stored in the printer's DRAM, Flash, or optional memory card.
Print the current printer configuration.
Set the control prefix character.
Set the format prefix character.
Set the delimiter character.
Set the media action you want when you turn the printer on.
Action
Feed The printer ejects one label.
Calibration The printer calibrates the sensor levels,
determines the label length, and feeds one label.
Length The printer determines the label length and feeds
the label.
No Motion No action.
Description
Description
Description
65