Wi-Fi Network Connection (Windows) - Brother RJ-2035B User Manual

3.4.3 Wi-Fi Network Connection (Windows)

Make sure both your wireless router/access point's and your printer's network settings are
correctly set up. For more information, see the documentation provided with your wireless
router/access point, or contact the router manufacturer, your system administrator, or
Internet service provider.
1. Configure the network settings:
- Using the BPM
1. Connect your printer to the computer using a USB cable.
2. Click Printer Configuration > Wi-Fi.
3. Specify SSID, Encryption, and Key (Network Password), and then click Set.
4. Click Get and confirm that the printer's IP address is correct.
2. Visit support.brother.com, go to your model's Downloads page, and download the
latest printer driver and software.
3. Run the Seagull Driver Wizard application and select Install printer drivers and
Network.
4. Select your printer, and then click Next.
5. If your TCP/IP port does not appear in the list, click Create port and select Standard
TCP/IP port > New Port.
6. Type your printer's IP address and port name, and then click Next.
7. Click Finish.
8. Return to the Specify Port window and select the port you created.
9. Follow the on-screen instructions.
Note
If you cannot install a printer driver:
 Remove the printer drivers:
In the Seagull Driver Wizard application, select Remove printer drivers >
Automatically remove all Drivers by Seagull or Use advanced printer driver
removal options.
 Reset the printer settings:
Start the BPM, and then click Printer Function > Factory Default.
22