Printer Initialization - Brother TJ-4420TN User Manual

6.1.3 Printer Initialization

Printer initialization clears the printer's DRAM and restores its factory settings.
1. Turn off the printer.
2. Press and hold the right Selection button, and then turn on the Power Switch.
3. Release the button when Factory Default appears on the screen.
Note
The LED color will change as follows:
Amber (lit)  red (5 times)  amber (5 times)  green (5 times)  green/amber (5 times) 
red/amber (5 times)  green (lit)
After the initialization, the following factory settings will be restored:
Parameter
Speed
Density
Label Width
Label Height
Sensor Type
Gap Setting
Print Direction
Reference Point
Offset
Tear Mode
Peeler Mode
Cutter Mode
Rewinder Mode
Code Page
Country Code
Clear Flash Memory
152.4 mm/sec (6 ips) (203 DPI)
101.4 mm/sec (4 ips) (300 DPI)
76.2 mm/sec (3 ips) (600 DPI)
8
101.5 mm
101.5 mm
Gap sensor
3 mm
0
0,0 (upper left corner)
0
On
Off
Off
Off
850
001
No
58
Default setting