Taurus T10.3 Pro Assembly And Operating Instructions Manual
Hide thumbs
Also See for T10.3 Pro:
- Owner's manual (53 pages) ,
- Assembly and operating instructions manual (48 pages) ,
- Assembly and operating instructions manual (28 pages)
Subscribe to Our Youtube Channel
Related Manuals for Taurus T10.3 Pro
Summary of Contents for Taurus T10.3 Pro
- Page 1 Assembly and Operating Instructions max. 200 kg ~ 60 Min. 144 kg L 218 | W 85 | H 139 TFT10.3PROHD.03.01 Art. No. TF-T10.3PRO-3-HD Treadmill T10.3 Pro...
- Page 2 T10.3 Pro...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Electrical Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly OPERATING INSTRUCTIONS Console Display Button Function Programmes 3.3.1 Quick Start Programme 3.3.2 Target programmes 3.3.3 Low-Speed Programme 3.3.4 Pre-Set Programmes 3.3.5 Pace Programme 3.3.6 User-Defined Programmes 3.3.7 Heart Rate Controlled Programmes Fitness test... - Page 4 RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing WARRANTY CONTACT T10.3 Pro...
- Page 5 With Taurus® fitness equipment, the focus is on what sport is all about: maximum performance! Therefore, the equipment is developed in close consultation with athletes and sports scientists.
- Page 6 This notice indicates potentially hazardous situations which, if not avoided, will result in death or serious injuries! NOTICE This notice indicates further useful information. Retain these instructions in a safe place for future reference, maintenance or when ordering replacement parts. T10.3 Pro...
-
Page 7: General Information
GENERAL INFORMATION Technical Data TFT - Display of Speed in km/h Training time in min Training distance in km Calories in kcal Heart rate (when using hand pulse sensors or chest strap) Incline in % Metabolic equivalent Motor output: 3.5 HP continuous (AC motor) Speed range: 0.5 - 24 km/h (adjustable in steps of 0.1 km/h) Hot keys (Speed):... -
Page 8: Personal Safety
Make sure that nobody is within the range of motion of the equipment during training so as not to endanger you or other persons. ࣑ ATTENTION Do not insert any objects of any kind into the openings of the device. T10.3 Pro... -
Page 9: Electrical Safety
Electrical Safety DANGER ⚠ In order to reduce the risk of an electric shock, always unplug the equipment from the mains socket immediately after your workout, before assembly or dismantling, and before maintenance or cleaning. Do not pull on the cable. ⚠... -
Page 10: Set-Up Place
(over 70%) like swimming pools. A floor protective mat/equipment underlay can help to protect high-quality floor coverings (parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight unevenness. Recommended free zone: T10.3 Pro... -
Page 11: Assembly
ASSEMBLY General Instructions ⚠ DANGER Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly. ⚠ WARNING Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries. -
Page 12: Scope Of Delivery
In the event of complaints, the contractual partner must be contacted directly. CAUTION ⚠ If parts of the scope of delivery are missing or damaged, the assembly must not be carried out. 105L 105R STEP1 KH-264D2 STEP3 STEP2 11 M5*0.8*15L 4PCS STEP4 11 M5*0.8*15L 2PCS (mm) T10.3 Pro... -
Page 13: Assembly
Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fit properly. Tighten the screws using the tool only when you are instructed to do so. Step 1: Assembly of the handlebar posts Connect the two cables (121 and 122, 157 and 158) with one another. - Page 14 Connect the two cables (120 and 121, 156 and 157) with one another. ࣑ ATTENTION Be careful not to pinch the cables in the following step. Fix the handlebar (4) to the two handlebar posts (2 and 3) with four allen screws (91). Tighten the screws. M10x1.5x45L 105R 105L T10.3 Pro...
- Page 15 Step 3: Assembly of the console Fix the supporting tube (7) to the handlebar (4) with two allen bolts (142), two spring washers (143) and two flat washers (27). Connect the cables (93, 98, 118, 156 and 120) with their counterparts of the console (84). ࣑...
- Page 16 Fix the covers (8L and 8R) to the main frame (1) by pressing the lugs on the inside of the covers into the corresponding drill holes of the main frame until they engange audibly. Finally fix the covers (8L and 8R) to the handlebar posts (2 and 3) with two cross bolts (11). M5x0.8x15L T10.3 Pro...
- Page 17 Step 5: Alignment of the feet If the floor is uneven, you can stabilize the treadmill by turning the two setting screws under the main frame. Lift the treadmill on the desired side and rotate the setting screws under the main frame. Rotate the screws clockwise in order to remove them and to raise the running surface.
- Page 18 Return to the settings. Tap "System". Tap "Start" to update the software. Do not use or switch off the treadmill during the update. Check whether another update is available and carry it out as described above at regular intervals. T10.3 Pro...
-
Page 19: Operating Instructions
OPERATING INSTRUCTIONS NOTICE Familiarise yourself with all the functions and setting options of the device before starting training. Have the proper use of this product explained to you by a specialist. SAFETY KEY WARNING ⚠ For your safety, the device is equipped with an EMERGENCY STOP function. The equipment can only be operated if the safety key is correctly attached to the contact point of the cockpit. - Page 20 Furthermore, you need 7 times as much oxygen than when in rest. Training between three to six METs is seen as moderate physical activity. Training at more than six METs is seen as strong physical activity. T10.3 Pro...
-
Page 21: Button Function
Button Function BUTTON DESCRIPTION With this button you can start a training programme. When you are in the main menu, you can start your training via quick start. START When your training is paused, you can continue with your training by pressing this button. -
Page 22: Programmes
5.1. Press STOP again to end your training. An overview of the collected training data will be displayed. 5.2. Press START to continue with your training. Upon completion of the programme the console will start the cool down phase automatically. T10.3 Pro... -
Page 23: Low-Speed Programme
3.3.3 Low-Speed Programme Tap on “LOW SPEED” on the main menu. Choose either time, distance or calories as your target unit. NOTICE You can only choose one unit. Set a value for your desired target unit. Press START to start the programme. The programme starts with a speed of 0.5 km/h. - Page 24 Setting time / 30 = time for each section Programme SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE T10.3 Pro...
- Page 25 Setting time / 30 = time for each section Programme SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED...
- Page 26 Setting time / 30 = time for each section Programme SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE T10.3 Pro...
- Page 27 Setting time / 30 = time for each section Programme SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE...
-
Page 28: Pace Programme
6.1. Press STOP again to end your training. An overview of the collected training data will be displayed. 6.2. Press START to continue with your training. Upon completion of the programme the console will start the cool down phase automatically. T10.3 Pro... -
Page 29: Heart Rate Controlled Programmes
3.3.7 Heart Rate Controlled Programmes ⚠ WARNING Your training equipment is not a medical device. The heart rate measurement of this equipment may be inaccurate. Various factors can affect the accuracy of the heart rate measurement. The heart rate measurement serves only as a training aid. There are three different heart rate-oriented programmes. -
Page 30: Fitness Test
In case the console does not receive a signal for 15 seconds the programme will be stopped. If your heart rate gets to high the console will display “OVER PULSE”. In this case, please interrupt your test immediately. Upon completion of the test an overview of the collected training data will be displayed. T10.3 Pro... -
Page 31: Media
Media Here you will find many different apps like YouTube, Twitter, Facebook or Instagram. IMPORTANT NOTE To make sure the preinstalled apps are working correctly, you will have to update them from time to time. The apps that need to be updated will give you a message. To update the app, you need to have a google account. -
Page 32: Bluetooth And Fitness Apps
You will find the fitness apps in the app stores of Google or Apple. There you will find the apps “Kinomap” or “Zwift”. Please note that these apps are produced by an external manufacturer. Sport-Tiedje does not take any responsibility regarding the availability, functionality or contents of these programmes. Example: Kinomap T10.3 Pro... -
Page 33: Storage And Transport
STORAGE AND TRANSPORT General Instructions ⚠ WARNING The storage location should be chosen so that improper use by third parties or children can be prevented. If your equipment does not have transportation wheels, the equipment must be disassembled before transportation. ࣑... -
Page 34: Troubleshooting, Care And Maintenance
Use a suitable chest strap (see Wrong position of chest No pulse display RECOMMENDED ACCESSORIES). strap Reposition chest strap and/or Chest strap defective or moisten electrodes battery empty Changing batteries Pulse display defective Check if pulse display by hand pulse possible T10.3 Pro... -
Page 35: Care And Maintenance
Care and Maintenance The most important maintenance measure is the care of the running mat. This includes adjustment, re tensioning and lubrication of the running mat. Damage resulting from insufficient or neglected care is not covered by the warranty. You should therefore carry out maintenance checks at regular intervals. -
Page 36: Re-Tensioning The Running Mat
Continue turning the belt by hand so that the entire surface between the endless belt and the running plate is lubricated. Wipe off the excess lubricating oil or silicone spray. NOTICE This maintenance must also be carried out after prolonged non-use of the equipment. T10.3 Pro... -
Page 37: Maintenance And Inspection Calendar
Maintenance and Inspection Calendar To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session. The following routine tasks must be performed at the specified intervals: Part Weekly Monthly Quarterly Display console Tension of the running mat Lubrication of the running mat... -
Page 38: Recommended Accessories
Of course, you can also contact our customer service: by telephone, e-mail, in one of our branches or via our social media channels. We will be happy to advise you! chest strap floor mat chest strap contact gel silicone spray towels T10.3 Pro... -
Page 39: Ordering Spare Parts
Standard/Norm: Maximum weight/max. Benutzergewicht: Class/Klasse: Enter the serial number in the appropriate field. Date/Datum: Sport-Tiedje GmbH, Flensburger Str. 55, 24837 Schleswig MADE IN Serial nº.: Serial number: Brand / Category: Taurus / Treadmill Model Name: T10.3 Pro Article Number: TF-T10.3PRO-3-HD... -
Page 40: Parts List
D16*D8.5*1.2T Nylon nut 55208-1-2008-FA M8*1.25*8T Allen bolt 50308-5-0020-UF0 M8*1.25*20L Rear roller set 26200-3-1200-01 D25*D75*686L Inner hex head screw 54010-8-0080-F0 M10*1.5*80L Rear cover 264A1-6-2406-B0 789.6*164.7*164.6 Buffer(1) 26100-6-1081-R0 D30*37L*M8 Nylon universal adjusting feet 26200-6-1094-B0 D80*81L Front roller set 26200-3-1100-02 D25*D75*694L T10.3 Pro... - Page 41 Inner hex head screw 54010-5-0045-F4 M10*1.5*45L Multi-groove belt 58004-6-1100-00 250/PJ10 Motor 261A3-6-1085-00 AC3.0HP Nylon nut 55210-1-2010-CA M10*1.5*10T Flat washer 55110-1-2020-CA D20*D11*2T Inner hex head screw 54010-5-0030-C0 M10*1.5*30L Flat washer 551E1-1-2820-NA D28*D14*2T Insulating sleeve(1) 26200-6-1063-B0 D20*D10*8T Motor buffer 26200-6-1093-B0 65*40*5T Fixing plate 26200-6-1071-N0 30*20*4T Bolt...
- Page 42 Cable for emergency stop function 261D8-6-1736-00 450L Right protecting plate 264A1-3-1130-B0 Left protecting plate 264A1-3-1125-B0 Inner case of safety key 26100-6-1734-B0 39*15*13.3 Computer fixing plate 264A1-3-1530-J1 Safety key board 26200-6-1733-B0 74*45*7 Upper cover for handling tube 264A1-6-1576-B0 836*583*159.3 T10.3 Pro...
- Page 43 Lower cover for handling tube 264A1-6-1577-B0 836*356.8*193.7 105L Side cover for handling tube(left) 264A1-6-1594-B0 417.2*153.3*78 105R Side cover for handling tube(right) 264A1-6-1595-B0 417.2*153.3*78 106A Computer back cover 264A1-6-1748-B0 207.3*188*65.5 106B Computer decorative cover 264A1-6-1749-B0 188*49.2*20.5 107L Left handlebar grips 264A1-6-1571-B0 448.7*126*71 107R Right handlebar grips...
- Page 44 261D1-6-1737-00 LED7 color strip 135CM Round cross screw 50805-2-0010-N0 M5x0.8x10L Elastic rope 264A1-6-2098-B1 D2.5*500L Fixing hook 26502-6-2097-B0 37.8*100*20.6 Pad holder 26500-6-1713-B0 271.8*25*20 Pad holder support 26500-6-1766-B0 271.9*29.8*20.1 Disc head cross tapping screws 53335-2-0013-N0 ST3.5*13L Buffer strips 264A1-6-1084-B0 255*10*2T T10.3 Pro...
-
Page 45: Exploded Drawing
Exploded Drawing... -
Page 46: Warranty
WARRANTY Training equipment from Taurus® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline. - Page 47 Warranty Conditions For the warranty to be valid, the following steps must be taken: Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance.
-
Page 48: Contact
Mo - Fr 08:00 - 18:00 09:00 - 18:00 09:00 - 18:00 Please find a detailed overview including address and opening hours for all stores of the Sport-Tiedje Group in Germany and abroad on the following website: www.sport-tiedje.com/en/stores T10.3 Pro... - Page 49 LIVE FITNESS WEBSHOP AND SOCIAL MEDIA Sport-Tiedje is Europe’s largest specialist store www.sport-tiedje.co.uk for home fitness equipment with currently over www.sport-tiedje.de/blog 70 stores and one of the world’s most renowned online mail order companies for fitness equipment. Private customers order via the 25 www.facebook.com/SportTiedje web shops in the respective national language or have their desired equpiment assembled on...
- Page 50 Notes T10.3 Pro...
- Page 52 Treadmill T10.3 Pro...
Need help?
Do you have a question about the T10.3 Pro and is the answer not in the manual?
Questions and answers